Aims Power 3000 Watt Power Inverter Charger AIMS power

The ETL listed to UL 458 standards 3000 watt pure sine Aims Inverter Charger has surpassed the ETL requirements and includes a 2 year warranty. This inverter is a a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak DC and AC conversion efficiency of 92%. It is unique as the inverter will bypass 50 amps 120V or 240V (50A x2 @ 120V per leg) and outputs 120, ideal for RVs, work trucks, food trucks, and boats. It is packed with unique features and it is one of the most advanced aims inverter charger on the market today. This inverter also features power factor corrected, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.

The powerful battery charger is rated at 100 amps, and with power factor corrected, it uses 20-30% less energy from AC input than a standard charger, avoiding nuisance breaker trips or generator overloads. In response to the increasing demand of more advance battery charging, this model is equipped with Battery Temperature Sensing for increased charging precision. The overloads capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.

The transformers have been consistently improved for years to achieve the best balance of conversion efficiency, idle consumption and minimum THD. The idle consumption of the line is ultra-low, roughly 1.5% of its rated power. The AC battery priority switch and auto generator start functionally making it ideal to work in either backup power or renewable energy applications.

In AC priority mode, when utility AC power cuts off, the transfer relay is de-energized and the load is automatically transferred to the inverter output. Once the qualified AC utility is restored, the relay is energized and the load is automatically transferred to AC utility.

When customized to battery priority mode via the DIP switch, the inverter will extract power from external power sources in renewable energy systems and a minimal cycle of the battery will be required. With the availability of the auto generator start, an electrical generator can be integrated into the system as a backup and started when the battery voltage goes low.

Features

• Listed to UL 458 Standards
• Bypasses 50 amps 120V or 240V and outputs 120V
• 2 year warranty
• 3000 watt low frequency inverter
• 9000 watt surge for 20 seconds -3x surge capability
• Battery priority selector
• AC direct connect terminal block
• GFCI – 20 amps
• Marine coated and protected
• Multi stage smart charger 100 amps
• Remote panel available
• Auto gen start
• Auto frequency
• 10msec typical transfer time
• 7 battery type settings for charger including lithium

Aims Power 3000 Watt Power Inverter Charger Specifications

INVERTER OUTPUT

• Continuous Output Power 3000 Watts / 3KW
• Surge Rating (20 secs) 9000 Watts / 9KW
• Starting Electric Motor (HP) 3 HP
• Output Waveform Pure Sine
• Nominal Efficiency >92% (Peak)
• Line Mode Efficiency >95%
• Power Factor .9 – 1 Nominal
• Output Voltage (rms) 120Vac
• Output Voltage Regulation ± 10% RMS Output
• Frequency 50/60 Hz ±0.3Hz
• Short Circuit Protection YES. Current Limit Function (fault after 1 sec)
• Typical Transfer Time 10ms (MAX)
• Max THD @ Full Linear Load <20%

DC INPUT

• Nominal Input Voltage 12 Vdc
• Minimum Start Voltage 10Vdc
• Low Battery Alarm 10.5Vdc / 11.Vdc
• Low Battery Trip 10Vdc / 10.5Vdc
• High Voltage Alarm & Fault 16Vdc
• High DC Input Recovery 15.5Vdc
• Low Battery Voltage Recover 13Vdc
• Sleep Mode Threshold >50 Watts (Power Saven On)

CHARGE

• Input Voltage Range Narrow: 100-135Vac Wide: 90-135Vac
• Input Frequency Range Narrow: 47-55 ±0.3Hz @ 50Hz, 57-65 ±0.3Hz @ 60Hz
• Output Voltage Depends on battery type
• Charger Breaker Rating (120 Vac) 30A
• Max Charge Rate 100A
• Over Charge Protection Shutdown 15.7V
• Battery Type Fast Vdc Float Vdc
• Gel USA 14 13.7
• AGM 1 14.1 13.4
• AGM 2 14.6 13.7
• Sealed Lead Acid 14.4 13.6
• Gel Euro 14.4 13.8
• Open Lead Acid 14.8 13.3
• Lithium 14.4
• De-sulphation 15.5 for 4 hours
• Battery Temp Sensor YES. Part # PICGLFBATS

BYPASS & PROTECTION

• Input Voltage Waveform Pure sine from grid or generator
• Nominal Votage 120Vac
• Low Voltage Trip 80V/100V ±4%
• Low Voltage Re-engage 90V/100V ±4%
• High Voltage Trip 140V ±4%
• High Voltage Re-engage 135V ±4%
• Max Input AC Voltage 150Vac
• Nominal Input Frequency 50Hz or 60Hz (auto detect)
• Low Freq Trip Narrow: 47 ±0.3Hz @ 50Hz, 57 ±0.3Hz @ 60Hz Wide: 40 ±0.3Hz for 50/60Hz
• Low Freq Re-engage Narrow: 48 ±0.3Hz @ 50Hz, 58 ±0.3Hz @ 60Hz Wide: 45 ±0.3Hz for 50/60Hz
• High Freq Trip Narrow: 55 ±0.3Hz @ 50Hz, 65 ±0.3Hz @ 60Hz Wide: No limit for 50/60Hz
• High Freq Re-engage Narrow: 54 ±0.3Hz @ 50Hz, 64 ±0.3Hz @ 60Hz Wide: No limit for 50/60Hz
• Output Short Cirucit Protection Circuit Breaker
• Bypass Breaker Rating (120 Vac) 50A
• Bypass Breaker Rating (240 Vac) 50A GFCI Rating 20A

MECHANICAL

• Mounting Predrilled holes for wall/ground
• Dimensions 16.25″L x 11″W x 7″H
• Weight 58 lb
• Shipping Dimensions 21″H x 14″W x 12″H
• Shipping Weight 67 lb
• Displays Status LEDs/Optional LCD Remote
• Warranty 2 Year

Still Have Questions? Give us a call today 1-877-242-2792